1. kenyan care remains, no vote. Libtards and msm declare massive victory.
    Dismiss Notice
  2. Have a great weekend!
    Dismiss Notice
  3. Week of 3/25/2017 Closing prices & Chg Over Last Wk---- Gold $1248.50-- UP 18.30 Silver $17.75-- UP 34 Oil $47.97-- DOWN 134 TICS USD $99.42 -- DOWN 66 tics

Phone Talk

Discussion in 'Computers' started by searcher, Dec 29, 2016.



  1. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
    Samsung Galaxy Tab 4 7.0 Battery Repair - Fixez.com
    Fixez.com



    Published on Mar 19, 2017
    Samsung Galaxy Tab 4 7.0 Repair Parts: http://bit.ly/2nooMgS

    Samsung Galaxy Tab 4 Repair Tools: http://bit.ly/2lzLIop

    https://www.fixez.com presents the official Samsung Galaxy Tab 4 7.0 Battery Repair and Replacement Guide. Following the step-by-step, detailed instructions we have provided will help you safely replace a 7-inch Tab 4 battery that is damaged or not holding a charge. Visit Fixez.com for all of the DIY Galaxy Tab 4 7.0 replacement screens, parts and tools you need to fix your tablet quickly, and affordably.

    Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJr...
    Like us on Facebook: https://www.facebook.com/fixez.com
    Follow us on Twitter: https://twitter.com/fixezdotcom

    Samsung Galaxy Tab 4 7.0 Battery Repair Guide Video steps:

    Step 1

    Power down your 7-inch Samsung Galaxy Tab 4 tablet.

    Step 2 (Samsung Galaxy Tab 4 7.0 Rear Case)

    Use the plastic triangle opening tool to release the clips and then pop the Samsung tablet out of its rear enclosure.

    Step 3 (Samsung Galaxy Tab 4 7.0 Battery)

    Release the ZIF connector and detach the battery cable.

    Remove the sticker.

    Locate the pull-to-remove adhesive tab on top of the 7-inch Tab 4 battery. Slowly pull the tab up and away from the tablet to free the 3.8-volt, 4,000 milliampere-hour (mAh) Samsung battery.

    * To reassemble your device, follow the steps in reverse order.
     
  2. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
  3. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
    Tap a freckle to make a phone call and browse the web with a birthmark: Smart tattoos turn skin into phone controls
    • E-tattoos made of paper with wires and electrodes printed on top of them
    • Users transfer the tattoo by adding water to the it as it sits on the skin
    • Sensors embedded in the tattoos interact with specific smartphone functions
    • Users touch, squeeze and slide fingers over tattoos to access functions


    Read more: http://www.dailymail.co.uk/sciencetech/article-4325650/Smart-tattoos-turn-skin-smartphone-controls.html#ixzz4bnBN5r9b
    Follow us: @MailOnline on Twitter | DailyMail on Facebook
     
  4. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
    Samsung Galaxy Tab 4 7.0 Display Assembly Repair - Fixez.com
    Fixez.com



    Published on Mar 19, 2017
    Samsung Galaxy Tab 4 7.0 Repair Parts: http://bit.ly/2nooMgS

    Samsung Galaxy Tab 4 Repair Tools: http://bit.ly/2lzLIop

    https://www.fixez.com presents the official Samsung Galaxy Tab 4 7.0 Display Assembly Repair and Replacement Guide. Following the step-by-step, detailed instructions we have provided will help you safely replace a 7-inch Tab 4 LCD and digitizer assembly that is cracked or damaged. Visit Fixez.com for all of the DIY Galaxy Tab 4 7.0 replacement screens, parts and tools you need to fix your tablet quickly, and affordably.

    Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJr...
    Like us on Facebook: https://www.facebook.com/fixez.com
    Follow us on Twitter: https://twitter.com/fixezdotcom

    Samsung Galaxy Tab 4 7.0 Display Assembly Repair Guide Video steps:

    Step 1

    Power down your 7-inch Samsung Galaxy Tab 4 tablet.

    Step 2 (Samsung Galaxy Tab 4 7.0 Rear Case)

    Use the plastic triangle opening tool to release the clips and then pop the Samsung tablet out of its rear enclosure.

    Step 3 (Samsung Galaxy Tab 4 7.0 Motherboard)

    Release the ZIF connector and slide the battery cable out.

    Detach the bevy of cables from the 7-inch Tab 4 motherboard.

    Remove the following 5 Phillips screws.

    With the spudger in hand, extricate the motherboard from the Samsung tablet.

    Step 4 (Samsung Galaxy Tab 4 7.0 Touch Screen Digitizer/Front Panel)

    Use the heat gun to warm up the adhesive securing the 7-inch Galaxy Tab 4 touch screen digitizer to the midframe.

    Start attacking the adhesive with the triangle opening tool. Take your time and apply additional heat as needed.

    Once you have sliced through most of the sticky adhesive, use a playing card to help carefully finish the job. Be mindful of the digitizer’s cable when decoupling the Tab 4 touch screen from the midframe.

    Step 5 (Samsung Galaxy Tab 4 7.0 LCD Screen)

    Utilizing a playing card, patiently work around the 7-inch Samsung Galaxy Tab 4 LCD and free it from the adhesive securing it to the midframe.


    * To reassemble your device, follow the steps in reverse order
     
  5. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
  6. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
    NEW Product RED iPhone 7/7 Plus & New 9.7-inch iPad!
    EverythingApplePro



    Published on Mar 21, 2017
    The Product RED iPhone 7 & 7 Plus Is Official! + New 9.7-inch iPad, iPad mini & iPhone SE Updates & More!

    Latest iPhone 8 Leaks: https://youtu.be/Pr9Sb_tNiCc
     
  7. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
  8. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
    Motorola Moto E3 Power Screen Repair, Teardown and Reassemble - Fixez.com
    Fixez.com



    Published on Mar 24, 2017
    Motorola Moto E3 Power Repair Parts: http://bit.ly/2mzRPyv

    DIY Motorola Moto E3 Power Repair Tools: http://bit.ly/2lzLIop

    https://www.fixez.com presents the official Motorola Moto E3 Power Screen Repair, Teardown and Reassemble Guide. This step-by-step repair video will show you how to replace a cracked Moto E3 Power display assembly, and also how to completely teardown and reassemble your Motorola smartphone. Visit Fixez.com for all of the DIY Motorola Moto E3 Power replacement screens, parts and tools you need to quickly, and affordably, fix your device!

    If you need your Moto E3 Power repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your Motorola phone for you. They are available Monday to Friday, 9am to 5pm PST.

    Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJr...
    Like us on Facebook: https://www.facebook.com/fixez.com
    Follow us on Twitter: https://twitter.com/fixezdotcom

    Motorola Moto E3 Power Screen Repair, Teardown and Reassemble Guide Steps:

    Step 1

    Power down your Motorola Moto E3 Power phone.

    Step 2 (Motorola Moto E3 Power Rear Cover)

    Use the plastic triangle opening tool, or your fingernails, to work around the Moto E3 Power rear cover and release the plastic clips securing it in place.

    Step 3 (Motorola Moto E3 Power Battery)

    Easily lift out the long lasting 3.8-volt, 3,500 milliampere-hour (mAh) Moto E3 Power Battery.

    Step 4 (Motorola Moto E3 Power Exterior Midframe and Loudspeaker)

    • Remove the following 13 Phillips screws.

    • Use the triangle opening tool to pry up the plastic exterior midframe that protects the Moto E3 Power motherboard.

    • Extricate the Moto E3 Power loudspeaker and antenna module from the bottom of the phone.

    • Remove the piece of midframe from the side of the Motorola phone. It covers the blue signal cable.

    Step 5 (Motorola Moto E3 Power Motherboard)

    Remove the following 2 Phillips screws.

    Detach the bevy of cables from the Moto E3 Power motherboard.

    Pry the vibrator out of the chassis, but do not completely remove it as it is soldered to the board.

    Slide the spudger underneath the motherboard to detach the connection on the back side and free it from the Moto E3 Power interior midframe.

    Step 6 (Motorola Moto E3 Power Front-Facing Camera and Rear-Facing Camera)

    Remove the 5-megapixel Motorola Moto E3 Power front-facing selfie camera.

    Extract the 8-megapixel Moto E3 Power rear-facing camera from the motherboard.

    Step 7 (Motorola Moto E3 Power Signal Cable and Micro USB Board)

    Detach and remove the signal cable from the side of the Motorola phone.

    With the spudger in hand, disconnect the interconnect cable and then spudge up the Moto E3 Power Daughterboard. It includes the Micro USB connector, a microphone, spring contacts, and some control hardware.

    Step 8 (Motorola Moto E3 Power Earpiece Speaker and Power and Volume Buttons Cable)

    Tweeze out the Moto E3 Power earpiece speaker.

    Carefully remove the fragile power and volume buttons cable from the side of the interior midframe.

    Step 9 (Motorola Moto E3 Display Assembly)

    Remove the IMEI sticker.

    Peel the display cable up and away from the midframe.

    The 5-inch Moto E3 Power display assembly is glued on solidly. Apply heat to soften the adhesive.

    Use the precision knife to create enough space to insert a playing card.

    Start slicing through the adhesive with the playing card. Take your time and apply additional heat as needed.

    Once you have sliced through the adhesive, be mindful of the display’s cables when decoupling the Moto E3 Power screen from the frame.


    * To reassemble your device, follow the steps in reverse order.
     
  9. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    103,271
    Likes Received:
    34,066
    Trophy Points:
    113
    Asus ZenFone 3 Display Assembly Repair - Fixez.com
    Fixez.com



    Published on Mar 25, 2017
    Asus ZenFone 3 Replacement Screen: http://bit.ly/2o3XBpp

    Asus ZenFone 3 DIY Repair Tools: http://bit.ly/2lzLIop

    Watch the Official Asus ZenFone 3 Display Assembly Repair Guide. Following the step-by-step ZenFone 3 screen replacement instructions we have provided will help you safely replace a damaged or faulty 5.5" Asus screen. Visit Fixez.com for all of the DIY Asus ZenFone 3 replacement screens, parts and tools you need to fix your phone quickly, and affordably.

    If you need your ZenFone 3 repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your device for you. They are available Monday - Friday, 9am to 5pm PST.

    Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJr...
    Like us on Facebook: https://www.facebook.com/fixez.com
    Follow us on Twitter: https://twitter.com/fixezdotcom

    Asus ZenFone 3 Display Assembly Repair Video Steps:

    Warning:

    You are performing this repair at your own risk
    We claim no responsibility for any damages that might occur

    Step 1

    Power down your Asus smartphone.

    Step 2 (Asus ZenFone 3 SIM card and microSD Card Tray)

    Eject the SIM card and microSD Card Tray.

    Step 3 (Asus ZenFone 3 Rear Glass Panel)

    The ZenFone 3 rear glass panel is glued on solidly and is a tight fit within the narrow bezel. Apply heat to soften the adhesive.

    With the precision knife create enough space to insert a playing card.

    Attack the adhesive and carefully dislodge the 2.5D corning gorilla glass rear panel from the phone.

    Step 4 (Asus ZenFone 3 Exterior Midframe, Fingerprint Sensor, and Loudspeaker)

    Remove the following 19 Phillips screws.

    Detach the fingerprint sensor cable and signal cable from the ZenFone 3 motherboard.

    Use the spudger to pry up the plastic exterior midframe. It includes the ZenFone 3 fingerprint sensor and rear camera lens cover.

    Extricate the Asus ZenFone 3 loudspeaker module from the bottom of the phone.

    Step 5 (Asus ZenFone 3 USB-C Port/Daughterboard, Signal Cable, and Vibrator)

    Detach the ZenFone 3 battery connector from the motherboard.

    Extract the signal cable from the side of the interior midframe.

    Peel up the piece of Kaptan tape and disconnect the display cable from the daughterboard.

    Detach the interconnect cable.

    Remove the following Phillips screw.

    Remove the daughterboard from the Asus phone. It includes the Zenfone 3 USB-C port, primary microphone, vibrator, spring contacts, and some control hardware.

    Step 6 (Asus ZenFone 3 Battery)

    Locate the two peel-to-remove adhesive tabs at the bottom of the ZenFone 3 battery. Grab the first tab and try to keep the adhesive strip flat and wide.

    Slowly and gently pull each strip up and away from the Asus smartphone. The strips will stretch to many times the length of the battery- keep pulling until they come out from between the battery and the midframe.

    And just like that, out pops the 3,000 milliampere-hour (mAh), 3.85-volt Asus ZenFone 3 battery.

    Step 7 (Asus ZenFone 3 Motherboard)

    Disconnect the bevy of cables from the Asus ZenFone 3 motherboard.

    Remove the following 3 Phillips screws.

    Carefully free the motherboard from the gob of thermal paste securing it to the Asus phone.

    Step 8 (Asus ZenFone 3 Headphone Jack and Microphone Assembly, Earpiece Speaker, and Rear-Facing Camera)

    Remove the following Phillips screw.

    With the tweezers in hand, pry the 3.5mm headphone jack and microphone assembly up and away from the chassis.

    Tweeze out the spring-contact-connected ZenFone 3 earpiece speaker.

    Remove the 16-megapixel Asus ZenFone 3 rear-facing camera with the latest Sony IMX298 sensor.

    Step 9 (Asus ZenFone 3 Display Assembly)

    Peel the digitizer cable up from the Asus midframe.

    Begin to free the 5.5-inch ZenFone 3 display assembly by using the heat gun to warm up the adhesive securing it to the interior midframe.

    With the precision knife create enough space to insert a playing card.

    Use the playing card to attack the sticky adhesive. Take your time and apply additional heat as needed.

    Once you have sliced through the adhesive, be mindful of the display’s cables when decoupling the Asus ZenFone 3 screen from the frame.


    * To reassemble your device, follow the steps in reverse order.
     

Share This Page