1. Potus out of town, all is pretty quiet for now
    Dismiss Notice
  2. Good Mon Morning! Gold catches a bid +2.7 to 1256, while Silver is +16 to 1696. Crude still moving up 48 to 5115. The USD is down 6 and breaks 97, 9696.
    Dismiss Notice
  3. Week of 5/13/2017 Closing prices & Chg Over Last Wk---- Gold $1227.70-- UP 0.80 Silver $16.40-- UP 13 Oil $47.84-- UP 1.62 USD $99.13 -- UP .61
  4. "Spreading the ideas of freedom loving people on matters regarding high finance, politics, constructionist Constitution, and mental masturbation of all types"
    Dismiss Notice

Problems, Repairs And Fixes: Household, Shop, Etc.

Discussion in 'Projects, Builds, Woodworking, Metalworks' started by searcher, Jan 20, 2015.



  1. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Roadtrip to Quincy & Tallahassee Florida, Moultrie Georgia 2016
    Abom79



    Published on Nov 26, 2016
    This video is about my weekend roadtrip over to the Moutrie Georgia annual swap meet and to visit my cousin Alex of Alex's Garage (check out his channel). Along the way I stopped in to visit Mark Linquist who is a viewer of mine and recently printed some pictures of Stella for me. Mark owns and lives on a beautiful tobacco plantation in Quincy Florida, and was kind enough to show me around his studios and work shops! I will provide some links here to Marks work.

    Afterwards to hooked up with Alex for the weekend and we spent the day up in Moultrie checking out the big annual swap meet. It's a great place to see and I found several nice tools there.

    On the ride over I talk about the new ride.

    It was a fun weekend with lots to see! Hope you enjoy the video!

    Alex's Garage https://www.youtube.com/channel/UCxvE...
    Mark Lindquist web site http://www.lindquiststudios.com/Mark_...
    Some of Marks photography http://marklindquistphotography.com/w...
    http://lindquiststudios.com/Liberty_M...

    Abom79 Zip-up hoodies, tee shirts, and pocket tees on sale until December 4th.
    teeblaster.com/abom79swag
     
  2. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Storebought "C" Clamps Kinda Suck - So Build Your Own! TIG Welding Project With the HTP Invertig 221
    ChuckE2009



    Published on Nov 29, 2016
    Invertig 221 by HTP:
    http://www.usaweld.com/ProductDetails...

    Metal Supermarkets:
    https://www.metalsupermarkets.com/

    Interested in A Career In Welding? Click Here:
    http://www.georgiatradeschool.com/


    Music used includes "Heavy" by Huma-Huma, "Dude Bro", "The Wrong Way" and "Runaways" by Silent Partner, "In the Shadows" by Ethan Meixsell, and:

    Delusion 32 by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
    Artist: http://audionautix.com/
     
  3. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    A Thief Stole My Hydraulic Cylinder Ram - Also LEGANDARY Customer Service from Fedex & Ez-tools
    ChuckE2009



    Published on Nov 30, 2016
    EDIT- This is a re-upload. Apparently even after completely blacking out my address, it was still visible to some folks who were nice enough to let me know about it. I don't understand how this is even possible, but evidently it happened, so I've re-uploaded this without an image of the shipping label. Either way, thanks again EZ-tools and Fedex!

    EZ-tools:

    http://ez-tools.us/
     
  4. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Saturday Night Special 145 Part 1: Indicator Repairs, Viewer Gifts, Stella
    Abom79



    Published on Dec 3, 2016
    Abom79 Hoodies and T-shirts availible for sale until December 4th.
    https://www.teeblaster.com/abom79swag

    This week in part one I have some viewer mail to show. More stuff about Stella, and very kind and thoughtful gifts!
    I also have some repaired tools that has come in from M.R. Tool Repair. Mark is an excellent craftsman when it comes to precision instrument repairs. Give him a try, you will be pleased!

    To contact Mark about tool repairs, send him an email. He will promptly respond with an answer to your questions. mrtool2010@hotmail.com
     
  5. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Saturday Night Special 145 Part 2: Arbor Run-Out Inspection, Production Set-Ups
    Abom79



    Published on Dec 3, 2016
    In this episode, I show you some recent Jacobs chuck arbors I purchased off Amazon. I do an inspection to see what kind of run-out they may have.
    I also have some footage from work of some cast iron housings I have to bore and sleeve. I show what productions steps I used to help get the jobs done.

    Arbors purchased off Amazon: http://amzn.to/2gTaJKO
    Noga Magnetic Indicator Holders: http://amzn.to/2gT9ueu
     
  6. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Gearbox Shaft for Well Drilling Part 7: Keyways
    Abom79



    Published on Dec 3, 2016
    Time to mill the 4 keyways in the new gearbox shaft. I start off by tramming in the vertical milling head using the Edge Technology Pro-Tram.
    Theres a total of 4 keyways to machine in the shaft, and two of them are 180* apart from each other. I show one of the tricks I use to align the two keys using a shaper gage. I also show using an adjustable parallel to measure keyway width.
     
  7. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Where I've been? What's happening? My Rant!
    Benny CompTech



    Published on Dec 3, 2016
     
  8. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
  9. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Laura´s Industrial Lamps
    Laura Kampf



    Published on Dec 4, 2016
    Last week i came across 2 of these super rusty gasbottle caps.
    I thought they were perfect for an industrial reading light i wanted to make for a while now.

    I am in love with the classic Kaiser Idell Scissor Lamps and so i tried to recreate that design and adapt it to the gasbottle caps. It works really well and i am super happy with how they look.

    Although this looks quite complicated it is actually very simple to make...just prepare to spend some time at the drillpress :)

    Let me know how you like these lamps in the comments below.
    Thanks for watching!!


    Music by Epidemic Sound (http://www.epidemicsound.com)
     
  10. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Building This Rolling Planer Stand
    John Heisz



    Published on Dec 4, 2016
    Build article for this project: http://www.ibuildit.ca/Workshop%20Pro...

    Exclusive content on Patreon:
    https://www.patreon.com/user?u=865843...

    The Ultimate box joint jig plans for sale:
    http://www.ibuildit.ca/Sales/sales-9....

    My second woodworking channel:
    https://www.youtube.com/channel/UCzGb...

    My home reno channel:
    https://www.youtube.com/channel/UCMlf...

    As mentioned in the video and in the build article, this stand was designed to be easy to make and strong enough for what I'll be using it for. It can be made MUCH stronger by adding internal braces, but that would reduce the storage capacity.
     
  11. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Off Grid Living - Another Battery Fail - New Sealed Batteries - Solar System - Part 1 of 2
    Modern Off Grid DIY



    Published on Dec 4, 2016
    Off Grid Living another battery fail new sealed batteries solar system Part 1 of 2
     
  12. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Off Grid Living - Failed Battery - Upgrade to Sealed Deep cycle Batteries Part 2 of 2
    Modern Off Grid DIY



    Published on Dec 4, 2016
    off Grid Living failed battery upgrade to Sealed Deep cycle Batteries Part 2 of 2
     
  13. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Off Grid Living - Solar Bad Battery Fried My Led TV - Lucky It's under warranty - Only 2 Months Old
    Modern Off Grid DIY



    Published on Dec 5, 2016
    Off Grid Living solar Bad battery fried my led tv lucky its under warranty.
     
  14. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #350 pt 1 tubalcain MAKES A TOOLMAKER'S VISE
    mrpete222



    Published on Dec 6, 2016
    PLEASE watch all 9 parts of this video series where I machine a Tiny
    Toolmaker's Vise. Subscribe, Like, & Comment.
    I have 750 shop videos.
     
  15. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #351 pt 2 tubalcain MAKES A TOOLMAKER'S VISE
    mrpete222



    Published on Dec 7, 2016
    PLEASE watch all 9 parts of this video series where I machine a Tiny
    Toolmaker's Vise. Subscribe, Like, & Comment.
    I have 750 shop videos.
    Buy steel from--www.hobbymetalkits.com
     
  16. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Remove a bearing and easy reinstall
    sixtyfiveford



    Published on Dec 7, 2016
    Some tips for making bearing removal easier.
    If you need a new bearing, don't forget to check out places like Amazon right here: http://amzn.to/2h5Pi8N type your bearing # into the search

    You use the same method for taper bearing races.
    If you have a blind bearing, you'll need a kit like this http://amzn.to/2h8Ms3w
     
  17. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Woodland Mills HM126 lube modification / setup ... better than stock
    Matthew Olson



    Published on Dec 8, 2016
    Just a quick tour through what I did with the HM126 blade lube setup. This is much better than the stock setup for sure.
     
  18. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Saturday Night Special 146 Part 1: Viewer Mail, Tool Trade, Photography
    Abom79



    Published on Dec 10, 2016
    This week I share some very nice viewer mail from several viewers including some new photos printed out and framed up for my by Mark Lindquist.
    Mark is in search of a licensed and Insured contractor or roofer to help him with repairs on his old tobacco barn. If you know of anyone who he could contact please email me and Mark. He would really appreciate the help.
    My email is: Abom1979@gmail.com
    Marks email is: art@artbiz.com
    Also in the mix is a very nice tool trade with a viewer, and a few tools scores from last weekend.
     
  19. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Saturday Night Special 146:part 2 Impeller Turning
    Abom79



    Published on Dec 10, 2016
    In this video I share with you some machine I had to do on two cast iron impellers. These were new but had to be machined down slightly to match the original sizes.
    I'll show using a shaft as a fixture to turn the impellers, and also some pretty decent sized mics to measure them.


     
  20. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Gearbox Shaft for Well Drilling Part 8: The Finale
    Abom79



    Published on Dec 10, 2016
    This is the final video for the gearbox shaft build. In this episode I'll set up the shaft on parallels in a vertical position to easily drill and tap the hole through the end flange for the grease zerk. This is a good technique that can be utilized on many long parts.
    Afterwards I'll give you some pictures of the final outcome.

    Thanks everyone who has been continuing to support my efforts here on youtube. I enjoy sharing the work I do and bringing you new content on the weekly basis.

    Adam

     
  21. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #352 pt 3 tubalcain MAKES A TOOLMAKER'S VISE
    mrpete222



    Published on Dec 9, 2016
    PLEASE watch all 9 parts of this video series where I machine a
    Toolmaker's Vise. Subscribe, Like, & Comment.
    I have 750 shop videos.
    Buy steel from--www.hobbymetalkits.com
     
  22. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    THIS & THAT #23 tubalcain Rust Removal Update, Guns
    mrpete222



    Published on Dec 10, 2016
    Please subscribe - I have 800 shop videos.
    THANKS FOR WATCHING!
     
  23. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #353 pt 4 tubalcain MAKES A TOOLMAKER'S VISE
    mrpete222



    Published on Dec 11, 2016
    PLEASE watch all 9 parts of this video series where I machine a Toolmaker's Vise. Subscribe, Like, & Comment.
     
  24. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #354 pt 5 tubalcain MAKES A TOOLMAKER'S VISE starrett
    mrpete222



    Published on Dec 13, 2016
    PLEASE watch all 9 parts of this video series where I machine a Toolmaker's Vise. Subscribe, Like, & leave a nice Comment.
    I have 750 shop videos.
     
  25. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    SCREWY TUESDAY #93 REID SURFACE GRINDER 612h
    outsidescrewball



    Published on Dec 12, 2016
    This video is about some maintenance on the Reid surface grinder along with some other shop fun....
     
  26. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Monday Night Meatloaf 108
    oxtoolco



    Published on Dec 12, 2016
    In this video we take a look at Friction Stir welding again with some excellent results. We also check out some precision ground blocks from the ongoing five block challenge, end measures for a Pratt Whitney Jig bore, levels and more levels, a mystery tool with a prize and some viewer appreciation mail.
    Link to Pierre Beaudry's channel
    https://www.youtube.com/channel/UCVgo...
    Link to Phil's Projects channel
    https://www.youtube.com/user/phildesj...
    Link to Spencers grinding video
    https://www.youtube.com/watch?v=aaVaz...
    Link to the Safety Store
    http://www.4safetystore.com/
     
  27. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
  28. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #355 pt 6 tubalcain MAKES A TOOLMAKER'S VISE starrett
    mrpete222



    Published on Dec 15, 2016
    PLEASE watch all 9 parts of this video series where I make a Toolmaker's Vise. Subscribe, Like, & leave a nice Comment.
    I have 800 shop videos.
     
  29. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #365 pt 7 tubalcain MAKES A TOOLMAKER'S VISE like starrett
    mrpete222



    Published on Dec 17, 2016
    PLEASE watch all 9 parts of this video series where I make a Toolmaker's Vise. Subscribe, Like, & leave a nice Comment.
    I have 800 shop videos.
     
  30. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    SNS 147 Part 1: Chuck TIR, HBM Drill&Tap, Load Cell, Auction Score, Family Party
    Abom79



    Published on Dec 17, 2016
    In part 1 I have quite a mix-up of content. I'll start off by sharing some tools I picked up from an individual who went to a machine shop auction. Next I show another smoked turkey for my family Christmas party, and then ride over and meet the family.
    For the shop content I have another test of the new chuck arbor and the new Rohm drill chuck, this time in a machine spindle. After that we have some HMB drilling and tapping, and last will be a clip of testing out our new load cell for the first time to see how much a shaft and gear weighs.
    Hope you enjoy!
     
  31. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    SNS 147 Part 2: Shop Made Tap Driver
    Abom79



    Published on Dec 17, 2016
    In this video i show you how you can machine you own "tap drivers" as I like to call them. This is a simple split bushing that is used to hold the odd sized shank of a tap and fit in a standard size collet.
    In this video I machine one to fit a standard 5/8" tap, and it will fit in a 7/8" collet and be used to power tap a hole using the machine power.
    I use the Victor lathe fro drilling, turning, boring, and parting. I'll also use the DoAll mill to mill the square slot and split it.

    Hope you enjoy!
     
  32. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Vlog 21 - Why Youtube is my Priority, A Workshop & New Interests
    Laura Kampf



    Published on Dec 15, 2016
    Here is my bi-weekly Vlog.
    Some quick updates on what´s going on and answering some questions.

    let me know how and how often you would like me to make these vlogs...it would be great to get some feedback :)

    thanks!!!
     
  33. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Laura´s Gas Bottle Stove
    Laura Kampf



    Published on Dec 18, 2016
    This week i built a Stove from a Gasbottle.
    I love the industrial "Mad Max" Style it has.
    Thank You Lincoln Electric for Sponsoring the Video and your Support

    I found the Gasbottle at the Junkyard - the Valve was missing.
    This Project is perfect for Beginners because the rougher your welds are, the better it looks :)

    We had a good time with it, i though it was really cool to fire it up with driftwood and enjoy a hot "glühwein" right at the river.

    This is also my first real prject using the Plasma Cutter and i honestly have to say that this is love at first sight! :)

    Let me know how you like the Project and Video
    Have a great Sunday!


    Music by Epidemic Sound (http://www.epidemicsound.com)
     
  34. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #357 pt 8 tubalcain MAKES A TOOLMAKER'S VISE like starrett
    mrpete222



    Published on Dec 19, 2016
    PLEASE watch all 9 parts of this video series where I make a Toolmaker's Vise. Subscribe, Like, & leave a nice Comment.
    I have 800 shop videos.
     
  35. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Pipe Welding Basics - 2G Schedule 40 Stick Welded - 6010 Root, 7018 Cap
    ChuckE2009



    Published on Dec 21, 2016
    Interested in A Career In Welding? Click Here:
    http://www.georgiatradeschool.com/

    Invertig 221 by HTP:
    http://www.usaweld.com/ProductDetails...

    Steel Provided Courtesy of Metal Supermarkets:
    https://www.metalsupermarkets.com/

    Music Used in This Video Includes "Dude Bro" by Silent Partner and:

    Essence by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
    Artist: http://audionautix.com/
     
  36. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
  37. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    TIPS #358 pt 9 tubalcain HOW TO MAKE A TOOLMAKER'S VISE
    mrpete222



    Published on Dec 23, 2016
    PLEASE watch all 9 parts of this video series where I make a Toolmaker's Vise. Subscribe, Like, & leave a nice Comment.
    I have 800 shop videos.
     
  38. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    SNS 148: Machining 12" Shaft, Internal Threading, Hand Tapping
    Abom79



    Published on Dec 24, 2016
    This week I'll start off with a couple viewer gift items I received. I also rant a little about customer service.
    At work I have been working on a 12" diameter gearbox shaft. I show some footage of pressing the gear off, and then the setup in the Pacemaker lathe. One end requires an internal 2 1/2-4 thread, so I do some single point internal threading, then make use of a 2 1/2" hand tap and my Greenfield No. 22 tap wrench.

    Logic Industries : https://www.youtube.com/user/LogicInd...
    Purchase Airbases here: http://logic-industries.com/airbase.htm
     
  39. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    Heavy Metal Machining Part 3
    Abom79



    Published on Dec 24, 2016
    This is the final video for this short series. Be sure to check out parts 1 and 2 to see all of the heavy pressing and turning action.
    In this episode, we do some work in the horizontal boring mill to get the end holes drilled and tapped. Afterwards, I'll set up the shaft in the milling machine to mill the three 2" keyways.
    Along the way I share with you some special "V blocks" I built to support the work, and other tips I use for measurements.

    I hop you enjoy and thanks again for all of the support I get from everyone!

    Tom Lipton at OxToolCo : https://www.youtube.com/user/oxtoolco
     
  40. searcher

    searcher Mother Lode Found Site Supporter ++ Mother Lode

    Joined:
    Mar 31, 2010
    Messages:
    110,040
    Likes Received:
    35,001
    Trophy Points:
    113
    A Chair for my Niece
    Laura Kampf



    Published on Dec 25, 2016
    Merry Christmas!
    This week i built a Chair for my Niece Edda.
    Thank You Rockler for sponsoring this Project and all your Support!

    I used a Handplane for most of the planing but at the end i had to cheat a little bit to get the board to the right thickness because i was running out of time :)

    Oak and Walnut work so well together - my favorite combination!
    Edda likes the Chair i think and I hope it will last for a long long time!

    Hope you enjoyed this video-happy holidays!!!

    visit Rockler at www.Rockler.com
    Music by Epidemic Sound (http://www.epidemicsound.com)
     

Share This Page