• Same story, different day...........year ie more of the same fiat floods the world
  • There are no markets
  • "Spreading the ideas of freedom loving people on matters regarding high finance, politics, constructionist Constitution, and mental masturbation of all types"

Problems, Repairs, Fixes, Tools & Equip: DIYers, Homowners, Shop, Etc.

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Vintage Heuer Vise Restoration
German Tool Reviews


Published on Nov 5, 2017
A restoration of a Vintage Heuer Vise with a back moving jaw. These types of vises were made in the 1920s and 1930s. All Heuer vises are forged steel vises that are advertised as being nearly indestructible.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Milwaukee M 12 Cordless Pipe Cutter Bails me out
Chuck Barron


Published on Nov 9, 2017
Pro Press is great until you forget to tighten in a male adapter and all is pressed already.....but the modern tools even made my mistake not so bad...

Every day plumbing repairs and installs featured on vids all while my son CB2 the apprentice learns the trade. If you enjoy our content please Subscribe for more vids to come. Thank You for watching.


Music: Trespass - Gunnar Olsen https://youtu.be/4PpJZ6KL9z8

Rock Angel by Joakim Karud https://soundcloud.com/joakimkarud
Creative Commons — Attribution-ShareAlike 3.0 Unported— CC BY-SA 3.0

http://creativecommons.org/licenses/b...
Music promoted by Audio Library https://youtu.be/K8eRXvLL7Wo
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Change CIRCULAR SAW to CHOP SAW
Made in Poland


Published on Nov 7, 2017
Hi. My name is Darek and in this video I'll show you have to change CIRCULAR SAW to CHOP SAW.

I used the Evolution EVO230 saw which I got to do the review. I rarely use it, so I decided to make a chop saw from it.
If you want, you can use a standard circular saw, but then you will be have to cut only wood and soft materials.

The tool works very well, cuts quickly and accurately. Assembly and disassembly takes about 90 seconds, so I think it is a good result.

I know some of you will say "it would be better to go to homedepot and buy a new one".
In my case, I received a saw to do the review, I did not have to send it back, so I decided to use it to do the chop saw.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
SNS 192: Shop Projects, Edge Multi-Axis Stop, Drill&Tap Spring Perch
Abom79


Published on Nov 11, 2017
This week's content consist of what I have been working on this week in the shop. I got a few shop projects done, and I also finished out the last bit of machining on the custom spring perches.
I use the new Edge Products Multi-Axis stop for the first time while getting the perches finished up. I have a few other random machining clips added to the mix from my day job.

Edge Multi-axis Stop http://www.edgetechnologyproducts.com...

Abom79 Swag here https://storefrontier.com/collections...

If you'd like to support this channel check me out on Patreon.
https://www.patreon.com/abom79
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Fabtech 2017 Highlights & Hoodies
weldingtipsandtricks


Published on Nov 14, 2017
Fabtech 2017 was the best one ever.
The reason?
Instagram, YouTube, and other social media has provided a way to have real community of like minded trades people.
So not only can you see the latest, coolest, most innovative products at Fabtech...but its also a place to connect with people you interact with online.
So cool.
Lincoln Electric brought in a few of my favorite Youtubers from the maker community to build a table and chairs and it was fun hanging out with Jimmy Diresta, April Wilerson, John Malecki, Crafted workshop, retroweld, and Zhfabrications.
The table and chairs turned out great.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
BOLTR: Haldex Hydraulic Pump | How to ID pump size
AvE


Published on Nov 13, 2017
A indepth look at a unknown pump. What killed it and how to spec a replacement. Skip to 13:00 for pump ID and sizing. Skip to 25:00 for failure analysis. Gadgets https://www.etsy.com/ca/shop/AvEwerkz
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Using Turnbuckles on XXL Concrete Footing - EP.10
Essential Craftsman


Published on Nov 14, 2017
This concrete form will be underground....so why make it plumb and true?? Learn about concrete stakes here: https://youtu.be/UixavBBmHmw

The neighbor contributed money to the construction of this retaining wall. In exchange for this $ we built the wall in a way that increased his usable lot space. For details on this including actual dollar amounts please visit our Patreon page. All of the costs of this project are share there. https://www.patreon.com/essentialcraf...
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
SNS 193: ZTFab Racks, Fume Extractor, Liquid Nitrogen, Weekly Jobs
Abom79


Published on Nov 18, 2017
We start off with some more shop improvement projects for the new shop addition, getting some organization done. I decided to paint the fume extractor to freshen it up, and I have a random mix of footage from the past week of different jobs, and even the Sky Writers, and the Blue Angels flying over. Overall most of my week rolled into 30 minutes.

Thanks to everyone who continues to support me, my channel, my shop, and my efforts moving forward. EVERYONE here is a part of that!
If you'd like to help me with continued shop improvements and future expansions, consider becoming a Patron.
https://www.patreon.com/abom79

Abom79, Booth Machine Shop, and Shop Life swag always available on my Storefront!
https://storefrontier.com/collections...

For daily uploads follow me on Instagram @Abom79


 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Craftsman Power Hacksaw Braze Repair
Abom79


Published on Nov 18, 2017
This was another viewer submitted project involving a needed braze repair on an old Craftsman power hacksaw. We'll do some set up in the Do-All milling machine, some brazing, and some final machining.
I was surprised at the descent quality video I was able to capture this time of the brazing.

If you'd like to help support my efforts and this shop, consider becoming a Patron. https://www.patreon.com/abom79
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Orbitrol Valve Details | My Errors Rectumfried.
AvE


Published on Nov 20, 2017
Thanks to Taylor Leeson and chkstr96 for pointing and laughing.
Cockford-Ollie stickers. HR dept. approved! (wink-wink) https://www.etsy.com/ca/listing/53048...
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
SNS 194 Part 1: Stick Welding, Fireball Tool Mini Squares, Liquid Nitrogen
Squares, Liquid Nitrogen
Abom79


Published on Nov 25, 2017
This week's two part episode will have a big mixup of content. Part one will have some of my trip to Tallahassee hangin with Alex and helping him with a welding project, and you get to see his pup Phoebe too. Later I show the new smoker I picked up, and also the new Fireball Tools mini welding squares. Near the end I show the guys shrink fitting the 10" vertical output shaft into the gear.
Part 2 will have some gearbox shaft machining.

Alex's channel: https://www.youtube.com/channel/UCxvE...

Fireball Tool Website : https://www.fireballtool.com/

Fireball Tool's channel : https://www.youtube.com/channel/UCKYP...

Pit Barrel Cooker: https://www.pitbarrelcooker.com/
http://amzn.to/2iLnb1t

Abom Adventures channel: https://www.youtube.com/channel/UCS9d...

If you'd like to support my shop and channel, check me out on Patreon. https://www.patreon.com/abom79

Lincoln MP 210 welder: http://amzn.to/2A1xc4o
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Sns 194 Part 2: Gearbox Shaft Machining, Turning, Radius, Measuring, & Keyways
Abom79


Published on Nov 25, 2017
This video shows some shaft machining I worked on this week. I'll give you a few tips I use on measuring shoulder lengths, turning to a precision diameter, and milling a key way.
We also take a quick peak in the clean room to see some in process builds going on.

Noga Mini Cool: http://amzn.to/2A0chP9

Starrett Adjustable Parallel: http://amzn.to/2zf1kp5

Mighty Mag: http://amzn.to/2hYLIms

Want to support this channel? https://www.patreon.com/abom79
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Moultrie Georgia Swap Meet 2017
Abom79


Published on Nov 25, 2017
The swap meet in Moultrie Georgia is an annual event which I have gone to the past 4 year snow. it's a fun event that take you all day and maybe even two to see it all. There's a huge vender section full of nearly anything car related, Americana, and tooling. There's also a car corral that's equally as big as the vendor section.
While there I caught up with Jim Bollinger and Keith Rucker, and together with Abby and Alex we walked the endless rows of stuff searching out good deals and hidden gems.
I added some time lapse footage of the trip there just for fun! it was a beautiful day.

Alex's channel: https://www.youtube.com/channel/UCxvE...

Jim's Channel: https://www.youtube.com/channel/UCQ41...

Keith's channel: https://www.youtube.com/channel/UCyjw...

Anom79 on Patreon: https://www.patreon.com/abom79
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Tiny House Trailer - Ep.7 Insulation and Wall Paneling
Laura Kampf


Published on Nov 26, 2017
The first 400 people to click this link will get 2 free months of Skillshare http://skl.sh/laurakampf
Thanks Skillshare for supporting my work!!

and here is a link to James Victore´s class
https://www.skillshare.com/classes/Ha...

this episode is all about insulation and panneling the walls. i show you all the steps i took to make my trailer as warm and dry as possible.



If you like what i do you can support me at:
http://www.patreon.com/laurakampf

For more Infos visit
http://www.laurakampf.com
http://www.instagram.com/laura_kampf
http://www.facebook.com/laurakampfkoeln


Music by Epidemic Sound (http://www.epidemicsound.com)
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Power Hacksaw [Restoration]
Hand Tool Rescue


Published on Nov 26, 2017
This tool restoration was a unique experience. This is a Model 256 power hacksaw was made by L. Krushel & Sons Ltd. (LKS) of Morden, Manitoba, Canada. I am not sure of the age as there is very little information on this saw, but the motor is from the 1960s. LKS was most known for building high quality welders and produced the first 180AMP welder in Canada. The LKS 180AMP welder is still sought after today, but this hacksaw should not be.

I was not overly impressed with the build quality on this tool, so much so, that I would probably not use it and I do not want anyone else to use it ever again. That is why I decided not to replace the power switch on this tool. The majority of the hacksaw is made with sections of angle iron welded together. I even had to hammer off the slag from the welds for painting, as it was never done the first time around. It was also odd to see shafts with no bushings or bearings around them for support. I imagine heavy use of this machine would wear our these parts very quickly.

There is no way to adjust the feed pressure or to make the cut more straight and square. This must have just been a nice thing to have that would quietly cut metal for further clean-up.

I understand that this tool was built in a time when most tools were starting to be made with cheaper materials and methods for competitive reasons.

I tried to match the colour as best as I could and applied 3 coats of filler primer, 4 coats of blue paint, and 3 clear coats. I used the snap rings I had lying around as I didn't want to buy whole new sets of them just for this application.

With a fresh blade, the saw did cut quite fast, but was not square. If you do come across an old power hacksaw, look for something built better and with adjustment mechanisms.


Help secure more tools for future videos (if you want): https://www.patreon.com/handtoolrescue

Instagram:
https://www.instagram.com/handtoolres...
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
SNS 195: Taper Indicating & Boring, Weekday Jobs, Pit Barrel Jr
Abom79


Published on Dec 2, 2017
Abom79 Tee's at Teeblaster, holiday colors: https://www.teeblaster.com/abomchristmas

My Storefront for all shirts and hoodies: https://storefrontier.com/collections...

Another weekly mix-up. I have a tapered bore coupling we work on in the Monarch, and some more jobs from the past week from the day job.
I also give the Pit Barrel Jr it's first cook and I show some highlights of that. For the full video please visit my Abom Adventures channel. https://www.youtube.com/channel/UCS9d...

Want to support this channel? Visit me on Patreon. https://www.patreon.com/abom79

 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Shop Update: Mig/Mag Welder Repair and Modification
The Post Apocalyptic Inventor


Published on Dec 9, 2017
A little Update about what the next episode is going to be about. AND YES: I'm posting updates on Youtube again. I tried to find aletrnative video-websites for this, but vid.me is now going out of business and a lot of people don't like to follow me on Facebook, so here they are back on YT.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
SNS 196: Tig Weld Repair on Kamado Joe, Weekly Mix
Abom79


Published on Dec 9, 2017
On a recent excursion to pick up a used Kamado Joe ceramic grill, the grill hood latch broke during the trip back home. Attempts to get a replacement wasn't as speedy as I had liked so I decided to try and fix the latch to get it working again.
Also in the mix I get the welding table moved to the new work area, and I show a few shorts of some work during the day.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
BIG COMPRESSOR PERFORMANCE BOOST | No tripped breakers!
AvE


Published on Dec 9, 2017
Compressor improvements using typical industrial controls. No manufacturers have invented a better way to control small compressors. It's a pain in the ass waiting to use a tool, only to have the pressure switch shut the compressor off when it finally builds pressure.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
New Garage & Patio Concrete
Abom79


Published on Dec 9, 2017
Pouring of the concrete for a future metal garage building, and a patio on the back of my house. This work was done by Zerber Concrete and the same guys who did the shop slab. Joe is a great contractor to deal with and I'd recommend him to anyone needing concrete work done.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
50 Gallon Bradford White Hot Water Heater Installed
Chuck Barron


Published on Dec 9, 2017
Every day plumbing repairs and installs featured on vids all while my son CB2 the apprentice learns the trade. If you enjoy our content please Subscribe for more vids to come. Thank You for watching.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Attempting to repair my air compressor and failing - should I fix it?
Tool Teardowns


Published on Dec 9, 2017
I had to edit something in the video and repost it.

Here’s how to replace the exhaust tube and motor bracket on a Campbell Hausfeld air compressor. In my case, this didn't fix my problems.

Now I’m trying to decide if I should fix this compressor or replace it.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Porter Cable Air Compressor Cylinder and Piston Rebuild
Keith Rucker - VintageMachinery.org


Published on Dec 8, 2017
My 17 year old Porter Cable air compressor quit pumping air a few weeks ago and I decided I would fix it rather than replace it. As is fairly common on these single stage air compressors, the piston and cylinder needed to be replaced, which is a relatively easy and inexpensive task to complete. I will show how to remove the parts from the head and repair them with a factory original rebuild kit.

Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery

Please Visit: http://www.vintagemachinery.org

Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
1950s Kango Jackhammer [Restoration]
Hand Tool Rescue


Published on Dec 12, 2017
It's nice to work with aluminum for a tool restoration. This tool is a Kango Jackhammer (Type E) from the 1950s. I believe type A, B, C, D came before it with the Type A starting in the 1930s. All labelled parts seem to be made in England.

It was really nice to see ZERO rust for a change as most parts have been soaking in oil, forever. I couldn't get the part where you insert the chisel to unscrew from the main casting, possible due to dissimilar metals corroding over time. The jackhammer was extremely dirty inside, to the point that the brushes and rotor we covered as well. Once cleaned up, the motor started working again.

The jackhammer does not have a lot of power (~only 500 watts) and the hammering action activates only when you push down on the chisel. This makes for an odd user experience. It also has ZERO anti-vibration designs and shakes my hands like crazy. The insane vibration and super cold temperatures annihilated my hands in short order.

I remade the name plate strip on photoshop and had it printed on clear vinyl. I thought stamping the main casting would look nice and keep longer so I went with that option. In the future I hope to get a small CNC router or high-powered laser engraver so properly remake metal name plates/tags.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Shop Talk 21: Taps
Abom79


Published on Dec 13, 2017
This is a basic discussion about three of the most common tap styles, Hand taps, spiral point taps, and spiral flute taps. I seem to get many comments requesting info on taps so here you go.
Hand taps are great for all general purpose tapping needs.
Spiral point taps are great for through hole tapping.
Spiral flute taps are great for blind holes, and power tapping.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
New Air Compressor and Tig Welder for the Shop!
Keith Rucker - VintageMachinery.org


Published on Dec 15, 2017
Some new additions to the shop this week include an air compressor and TIG welder.

Check out Brian Block's channel here: https://www.youtube.com/channel/UC4yN...

Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery

Please Visit: http://www.vintagemachinery.org

Sponsored by:
American Rotary Phase Converters
http://www.americanrotary.com
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
SNS 197: Concrete Update, Metric Shaft, Milling Metric Keyways
Abom79


Published on Dec 16, 2017
I show a quick update on the new finished concrete slabs and discuss what's planned for them. Then we jump to the machining project. Most of this footage is keyway milling in a new metric gearbox shaft. This is the first of two shaft I am building for a big gearbox repair job. The second shaft will follow with it's own video series.

I'll be heading out of town this coming week for a long vacation so you could experience a break in my uploads. I'm working hard to try and keep them coming but just want to give a heads up on that.

Thank you Patreon supporters! Your help is helping to grow this show into what you see. If you'd like to contribute a buck and help this channel, check me out on Patreon. https://www.patreon.com/abom79

You can also find me on Facebook and Instagram @Abom79. Links to all my social media including my tee shirts can be found on my home page in the upper right corner.

Abom79 tee's and hoodies are available anytime! https://storefrontier.com/collections...
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Grunt Work - Shop Progress Update
Keith Rucker - VintageMachinery.org


Published on Dec 22, 2017
While I have been off of work this past week, I have been focusing on getting some machines and other projects finished up in the shop. It has mostly been "grunt work", and with the help of a college student that has been doing some work for me this week, we got a LOT accomplished. Here is a summary of the week's accomplishments.

Support VintageMachinery.org on Patreon:
https://www.patreon.com/vintagemachinery

Please Visit: http://www.vintagemachinery.org
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Your Questions & My Answers
Hand Tool Rescue


Published on Dec 21, 2017
I thought it would be a great way to end a year of tool restorations with some answers to questions you have asked most often.

Thank you all for being a source of motivation and for the support you have provided!

I've opened some new places for you to share your restorations with me and others. Have a look below!

Help secure more tools for future videos (if you want): https://www.patreon.com/handtoolrescue

Instagram:
https://www.instagram.com/handtoolres...

Facebook Group - Share your restorations
https://www.facebook.com/groups/handt...

Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
SNS 198: Metalizing, Bearing Plate, Hexagon Metrology
Abom79


Published on Dec 23, 2017
One last SNS for 2017! In this episode we have some seal journal metalizing (spray welding), Machining a new ductile iron bearing plate, and use of a Hexagon Metrology CMM.

It's been an awesome year and I'm thankful for all my viewers, subscribers, and supporters! Thank you for helping to make this YouTube channel what is has become. I look forward to more great things in the coming 2018 year!

If you'd like to contribute to the shop check me out on Patreon. https://www.patreon.com/abom79

Abom79 tee shirts are always available here. https://storefrontier.com/collections...
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Swedish Gearbox Shaft Part 1
Abom79


Published on Dec 23, 2017
First of a multi-part video showing the machining of a metric gearbox shaft that was built in Sweden. This is a rebuild taking place in our shop that has several parts that had to be repaired and machined. I machined two of the shafts, a bearing plate, and a couple other parts as well.
I have many viewers who only use the metric system, so this should satisfy a little of your metric machining hunger.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
Smudo´s Tiny Doghouse
Laura Kampf


Published on Dec 17, 2017
Thank You Rockler for supporting this Project!
visit them at www.rockler.com

I had so much leftover material from my Tiny House Trailer that i figured i might as well build smudo his own Tiny Doghouse.

If you like what i do you can support me at:
http://www.patreon.com/laurakampf

For more Infos visit
http://www.laurakampf.com
http://www.instagram.com/laura_kampf
http://www.facebook.com/laurakampfkoeln


Music by Epidemic Sound (http://www.epidemicsound.com)
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
149,700
Likes
40,226
What is a Ribbon Burner?
Essential Craftsman


Published on Dec 19, 2017
Are you building a forge? Consider using a ribbon burner! Please leave a comment, and many thanks to those of you who support EC at Patreon.