• Same story, different day...........year ie more of the same fiat floods the world
  • There are no markets
  • "Spreading the ideas of freedom loving people on matters regarding high finance, politics, constructionist Constitution, and mental masturbation of all types"

Problems, Repairs, Fixes, Tools & Equip: DIYers, Homowners, Shop, Etc.

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
Massive Gate Installation
Essential Craftsman


Published on Sep 5, 2018
Installing gates is a tough job when the gates are 16' long and 8' tall. The other gate over the water drainage area is at another location on this property...we'll discuss this all in detail later.

Thanks for watching and for sharing Essential Craftsman with your friends.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
SNS 230: Student Welder, K&T Mill Repairs, Handbook Giveaway
Abom79


Published on Sep 8, 2018
Last weekend I helped to mentor my cousin Gabriel with his stick welding. He's going to a welding tech school and has inspirations of becoming a traveling pipe liner. I got some footage of that to share.
I also got back on the K&T mill, getting the motor pulled off. It's now at the motor shop and I'll have more on that next week. Lastly I pick a winner for the Machinery's Handbook giveaway.

Want to help support this channel? https://www.patreon.com/abom79

Abom79 t-shirts and hoodies https://www.storefrontier.com/store/a...
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
Custom Internal Shaping Bar Part 4
Abom79


Published on Sep 8, 2018
I finish off the hex retaining nut showing the internal threading and facing operations, and the drilling and broaching for the square hole in the internal bar.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
Shop Talk 25 Vintage Drill Indexes
Abom79


Published on Sep 12, 2018
I share my collection of vintage drill indexes that I enjoy collecting.
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
POP UP ASSEMBLY AND SINK TRAP REPLACED
Chuck Barron


Published on Sep 9, 2018
POP UP ASSEMBLY AND SINK TRAP REPLACED
Every day plumbing repairs and installs featured all while my two sons CB2 and Angelo learn the plumbing trade.
Subscribe-http://www.youtube.com/c/ChuckBarron

Follow us on social Media
https://www.facebook.com/charles.barr...
https://www.instagram.com/chuckbarron6/
https://twitter.com/Chuckbarron6

DISCLAIMER: This video is for entertainment purposes only. This video also contains affiliate links which if you click on link and make a purchase I may receive a small commission. This helps support the channel and helps us continue to bring you new video's like this one. Thank you so much for the support. Plumb on!

Check out some of our gear-http://chuckbarronplumbing.com/

▶ Check out my gear on Kit: https://kit.com/ChuckBarron
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
Grading and Drainage
Essential Craftsman


Published on Sep 15, 2018
To learn what all this work costs - please visit our Patreon page where we make that information available! http://bit.ly/ecpatreon

Moving dirt and shaping the earth is a very important part of construction. In this video you'll learn about Graders, Scrapers, Loaders, drainage, and more.

Once the construction on this project is finished we'll start back up on the spec house series - thanks for sticking with us!

All of this dirt work on the project was done by Vellema Construction LLC out of Phoenix Arizona. Mitchell Vellema was excellent to work with and did an outstanding job. You can reach Mitchell at vellemallc @ gmail.com or send us an email through our website and we'll give you his phone #.

Thanks for watching and for sharing Essential Craftsman with your friends.

The Microphone We Use https://amzn.to/2xdEPSv
The Camera We Use https://amzn.to/2xftSix

Enjoy EC? Support at Patreon! http://bit.ly/ecpatreon

Have you seen Cy's website? http://cyswan.com
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
RIDGID RP 340 PRO PRESS VIEGA GAS WORKS GREAT
Chuck Barron


Published on Sep 15, 2018
▶ Check out my gear on Kit: https://kit.com/ChuckBarron

A gas line change that is made very easy with Mega press and Viega Gas fittings.

Every day plumbing repairs and installs featured all while my two sons CB2 and Angelo learn the plumbing trade.
Subscribe-http://www.youtube.com/c/ChuckBarron

Follow us on social Media
https://www.facebook.com/charles.barr...
https://www.instagram.com/chuckbarron6/
https://twitter.com/Chuckbarron6

DISCLAIMER: This video is for entertainment purposes only. This video also contains affiliate links which if you click on link and make a purchase I may receive a small commission. This helps support the channel and helps us continue to bring you new video's like this one. Thank you so much for the support. Plumb on!

Check out some of our gear-http://chuckbarronplumbing.com/

RIDGID RP 340 PRO PRESS VIEGA GAS WORKS GREAT
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
Milwaukee (2706-20) VS Ridgid (R86116) - Best Cordless Hammer Drill Comparison Test!
VCG Construction


Streamed live 19 hours ago
Milwaukee (2706-20) VS Ridgid (R86116) - Best Cordless Hammer Drill Comparison Test!
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
SNS 231: Hydraulic Build, Machinery's Handbook Giveaway, 3D Print Cam Plate
Abom79


Published on Sep 15, 2018
This week is more Machinery Handbook giveaways! I've also got some random day job machining action, and some new tooling for the shop.

Want to support this channel? https://www.patreon.com/abom79

Abom79 t-shirts and hoodies: https://www.storefrontier.com/store/a...
New shirt design coming soon!
 

searcher

Mother Lode Found
Mother Lode
Sr Site Supporter
Joined
Mar 31, 2010
Messages
169,424
Likes
42,630
Custom Internal Shaping Bar Part 5
Abom79


Published on Sep 15, 2018
I decided to machine another bar that was shorter and give me enough cut for a 6" work piece. I used the Victor lathe for all of that turning, and made use of my Edge chuck stops, and 6 jaw chuck. After the bar is complete we"ll make some test cuts on the shaper to simulate what the bar will be used for.

Want to help support this channel? https://www.patreon.com/abom79

Abom79 t-shirts https://www.storefrontier.com/store/a...
New shirt design coming soon!
 

southfork

Site Supporter
Site Supporter
Mother Lode
Joined
Mar 31, 2010
Messages
15,000
Likes
13,519
Swapping out a generator armature , they said it couldnt be done my bush fix puller did the trick, i rented one from auto zone which was free after i took it back, used my arms hooked to their arms to make it longer and viola, swapped the generator portion out. BTW tried to drill a hole higher up went to both lowes and depot, paid over 6bucks for their best 1/4 inch drill bit, neither would drill the metal, mind you this was made in 70 , when men were made of steel and boxcars were made of wood.
 

Attachments