Rate your Chainsaws

[searcher]

Chainsaw Husqvarna 562 XP and cutting ice
Garden and Forest

Published on Dec 31, 2016
Chainsaw Husqvarna 562 XP and cutting ice bath for hardening
Motorová pila Husqvarna 562 XP a řezání ledu pro otužovací koupel
Rybník Řeka Krucemburk Czech Republic

 

[searcher]

Kicking Off '17 Old School Style!
hotsaws101

Published on Jan 1, 2017
As we look forward into the new year of 2017, lets us be thankful we made it - as many that we knew and appreciated did not. Everyday that a logger or faller makes it out of the woods is another chance to love those around you - a blessing!

On a side project helping out a father and son tag team operation. Cat 3T with a cable blade and a pony (or goat) motor to start it. Mentioned in the video that the tracks looked original - the grousers were slight nubs at best. My dad had many of these over the years. Had to time the crank lever just right on the goat motor or it would tear your thumb out of the socket.
Thanks for watching.

 

[searcher]

New Years Eve SUPER BASH!!
Human

Published on Jan 2, 2017
Because this is how I party hard.

 

[searcher]

Makita 18v X2 LXT 36v Chainsaw in Action (XCU02Z)
TOOL BOSS

Published on Jan 2, 2017
https://www.amazon.com/gp/product/B00...

 

[searcher]

The Chainsaw Guy Shop Talk Vintage McCullough Surprise Restoration Phil's Pro 60
TheChainSaw Guy The Chain Saw Guy

Published on Jan 2, 2017
#the chainsaw guy restores vintage McCulloch Pro mac 60

 

[searcher]

Timber Tuff TWS - 20 Portable Chainsaw Mill Unboxing
Love2boat92

Published on Jan 2, 2017
Don't forget to like, comment, and subscribe for more!

Thanks for watching!!

 

[searcher]

Felling a tree manipulation chainsaw Husqvarna 562 XP
Garden and Forest

Published on Jan 3, 2017
Felling a tree manipulation chainsaw Husqvarna 562 XP
Kácení a manipulace stromu motorovou pilou Husqvarna 562 XP
Ścięciu drzewa manipulacji łańcuchowa Husqvarna 562 XP
Doborârea manipulare copac ferăstrăul cu lanț Husqvarna 562 XP

We have created an open Facebook group where you can write your comments, but also can upload your photos, videos and discuss with the others! Join us! And you can even add your friends!
https://www.facebook.com/groups/21089...
A pro Česko-Slovensko
https://www.facebook.com/groups/17993...

Visit our Facebook:
Navštivte náš Facebook:
https://www.facebook.com/Garden-and-F...
https://www.facebook.com/Pr%C3%A1ce-v...

 

[searcher]

Cutting down a small tree chainsaw Husqvarna 562 XP
Garden and Forest

Published on Jan 4, 2017
Cutting down a small tree chainsaw Husqvarna 562 XP
Wycinanie małych drzew łańcuchowa Husqvarna 562 XP
Das Abholzen einen kleinen Baum Motorsäge Husqvarna 562 XP


We have created an open Facebook group where you can write your comments, but also can upload your photos, videos and discuss with the others! Join us! And you can even add your friends!
https://www.facebook.com/groups/21089...
A pro Česko-Slovensko
https://www.facebook.com/groups/17993...

Visit our Facebook:
Navštivte náš Facebook:
https://www.facebook.com/Garden-and-F...
https://www.facebook.com/Pr%C3%A1ce-v...

 

[searcher]

Sharpening the chain with a file on the chain saw Husqvarna
Garden and Forest

Published on Jan 5, 2017
Sharpening the chain with a file on the chain saw Husqvarna
Ostření řetězu pilníkem na motorové pile Husqvarna
Ostrzenie łańcucha z plikiem na pilarki Husqvarna

We have created an open Facebook group where you can write your comments, but also can upload your photos, videos and discuss with the others! Join us! And you can even add your friends!
https://www.facebook.com/groups/21089...
A pro Česko-Slovensko
https://www.facebook.com/groups/17993...

Visit our Facebook:
Navštivte náš Facebook:
https://www.facebook.com/Garden-and-F...
https://www.facebook.com/Pr%C3%A1ce-v...

 

[searcher]

Felling and complete processing of trees, chainsaw Husqvarna 562 XP
Garden and Forest

Published on Jan 5, 2017
Felling and complete processing of trees, chainsaw Husqvarna 562 XP-Kácení a kompletní zpracování stromu motorovou pilou Husqvarna 562 XP-Wycinka i kompletne przetwarzanie drzew, pilarka Husqvarna 562 XP

 

[searcher]

Chainsaw Husqvarna 562 XP, felling a tree 130 years old, 5,5 cm3
Garden and Forest

Published on Jan 6, 2017
Chainsaw Husqvarna 562 XP, felling a tree 130 years old, 5,5 cm3
Řetězová pila Husqvarna 562 XP, kácením 130 let, 5,5 cm3
Piła łańcuchowa Husqvarna 562 XP ścięciu drzewa 130 lat, 5,5 cm3
We have created an open Facebook group where you can write your comments, but also can upload your photos, videos and discuss with the others! Join us! And you can even add your friends!
https://www.facebook.com/groups/21089...
A pro Česko-Slovensko
https://www.facebook.com/groups/17993...

Visit our Facebook:
Navštivte náš Facebook:
https://www.facebook.com/Garden-and-F...
https://www.facebook.com/Pr%C3%A1ce-v...

 

[searcher]

The test chainsaws Husqvarna 40 Special
Garden and Forest

Published on Jan 7, 2017

 

[searcher]

Back To School (Large Dead Elm Removal)
Human

Published on Jan 9, 2017
A Removal we did for the Clayton school district here in St. Louis.

 

[searcher]

Cutting down a tree shortly after dawn chainsaw Husqvarna 562 XP
Garden and Forest

Published on Jan 10, 2017
Cutting down a tree shortly after dawn chainsaw Husqvarna 562 XP

We have created an open Facebook group where you can write your comments, but also can upload your photos, videos and discuss with the others! Join us! And you can even add your friends!
https://www.facebook.com/groups/21089...
A pro Česko-Slovensko
https://www.facebook.com/groups/17993...

Visit our Facebook:
Navštivte náš Facebook:
https://www.facebook.com/Garden-and-F...
https://www.facebook.com/Pr%C3%A1ce-v...

 

[searcher]

Husqvarna chainsaw 562xp
Garden and Forest

Published on Jan 10, 2017

 

[searcher]

Chainsaw Husqvarna 562 XP idling, a tack! 0% vibes!
Garden and Forest

Published on Jan 11, 2017

 

[searcher]

Chainsaw Fail !!! You don't cut a tree like that-Compilation 4
potatojoee

Published on Jan 11, 2017
Compilation of tree cutting fails and accidents. Not all of them are funny, some people got seriously injured. People, hire professionals next time.

 

[searcher]

Husqvarna 372 Chinese build Flywheel, Stator, Set Air Gap
jerry bskorner

Published on Jan 12, 2017
Get parts for your Husqvarna 372 here http://amzn.to/2ilEOoq

This is first video of the Husqvarna 372 china build the new motor, clutch, oil pump and muffler came in from china and now it's time to start transferring all the parts. in this video we are dealing with the issues with the stator and getting the flywheel and the air gap set up.

 

[searcher]

Complete the felling of trees, chainsaw Husqvarna 562 XP
Garden and Forest

Published on Jan 12, 2017

 

[searcher]

All new and rare! Tree Fails and Idiots with Chainsaws S02E01
M bud

Published on Jan 13, 2017
From the very beginning of 2017 we start our second season of idiots with chainsaws and tree fails. The first episode is already here for your entertainment and education!

ATTENTION! Never try tree removal, tree cutting or tree felling as it is performed in this video. Always remember that hiring a professional lumberjack or arborist is much safer and cheaper.

No one is neither dead due to the circumstances occurred in the video, nor has suffered any serious injuries for the same reason.

Enjoy and comment on your favourite piece!

Best of 2016:
https://youtu.be/WgBuF0FDj40

Subscribe here: https://www.youtube.com/channel/UCMdr...

Chainsaw and tree wins compilation:
https://www.youtube.com/watch?v=Vbuii...

Social:
Facebook: http://facebook.com/blog.mbud
Twitter: https://twitter.com/MBUD_by
Telegram: https://telegram.me/mbuder
Google+: https://plus.google.com/u/1/+mbudby

 

[searcher]

Lightning Struck (Large Oak Removal)
Human

Published on Jan 14, 2017
This oak was struck by lightning roughly two years ago according to the homeowner. Portions of it were still alive, though the majority of it going over the house is clearly dead.

 

[searcher]

A Day In The Woods Jan 2017, Skidding Logs, Running A Jonsered 2051 & "Bling Saw" MS660
afleetcommand

Published on Jan 14, 2017
Needed to get those logs out of what normally is a wet area, 15 degree temperatures "dried" things out!

 

[searcher]

Woods Ported ms460 Jacking A Nice Redwood
hotsaws101

Published on Jan 15, 2017
Here we have a test drive on Mr. Hembury's ms460 sporting a 36" Stihl liteweight bar.
This video was once lost but is now found! As promised, I posted a vid of the saw working, albeit a few years late.
We are jacking a nice second growth, 1/4ed up the hill, in an attempt to save it out so the timber owner isn't left cryin...... Additionally, we were leaving all the whips possible in this strip so this unit will qualify for a "green" designation. This creates more challenges for the trees you are cutting - getting them the ground - as well the usable ground you are left with because of the "shot blockage" from leaving the whips standing. It was a pain working on/jacking this tree with the whips on the back side to be perfectly clear. In the end we did prevail so it was woods ported ms460 one and nice second growth red a big fat zero.....
And yes, I did slightly plagiarize Mr. Hembury's motto - which is a good one I might add!!!
Thanks for the test drive and plagiarize-ation!

 

[searcher]

DIY Husqvarna Chainsaw Clutch Removal
jerry bskorner

Published on Jan 16, 2017
Get the Husqvarna clutch tool here http://amzn.to/2jNWkzV

Get a Husqvarna 372xp clutch here http://amzn.to/2joyXQg

Today on the Husqvarna 372 Chinese build we are replacing the Clutch. I had to order a new clutch as the old one was missing the snap ring, spacer and special chain guide. You can either make your own Husqvarna clutch removal tool or buy one. The clutch itself is pretty inexpensive at around 35 dollars. Replacing the clutch will take you about 1/2 to a hour to do.

 

[searcher]

WAIT!.....I'm getting paid for this? (90' Cottonwood Removal)
Human

Published on Jan 16, 2017
Job was amazingly fun, numerous obstacles and Limited access with the trucks. By far the largest and highest top that I've dropped, big thanks to Joe for letting me do it.

 

[searcher]

Stihl MS 193T Overview/Review
Human

Published on Jan 16, 2017
I go over the Stihl MS 193T climbing saw, put it to some wood, then tell you what I think about it.

 

[searcher]

How Can You Tell If The Husqvarna You Want To Buy Is....Husqvarna??
afleetcommand

Published on Jan 16, 2017
Spike60 goes through some "clues" to help you identify OEM vs. AM parts on a typical Husqvarna Chainsaw. AND we have our typical argument over semantics....:)

 

[searcher]

Aftermarket chainsaw parts, buyer beware, and failure modes!
Matthew Olson

Published on Jan 18, 2017
If you are looking for aftermarket chainsaw parts, please support my channel by buying from these guys http://www.hlsproparts.com/?Click=48376

Disclaimer: ladies and gents, this is a CHAINSAW, working with, building and fiddling with these can KILL YOU, I am not and will not be responsible for improper technique or accidents even remotely relating to this video, please view for entertainment purposes only.

This video is in response to Walt's vid:

https://youtu.be/aQ3ed6K-KvA

I'm just throwing my 2 cents in :)

Nice vid Walt, and thanks to Bob, Spike60 for his knowledge and help.

 

[searcher]

Stihl HT 133: Unboxing/Overview/First Cuts
Human

Published on Jan 26, 2017
Showing off the new stihl pole pruner, been waiting months for it to come in.

http://www.artslawnmowershop.com/

 

[searcher]

HyWay MS660 56mm Cylinder and Farmertec MS660 56mm cylinder Back to Back
afleetcommand

Published on Jan 29, 2017
Basically used the same bar chain sprocket and cut cookies from HARD and frozen maple...with a tap or two to keep things interesting. Results? Might surprise you, but was pretty much what I expected.

 

[searcher]

A First Look at some MS660 After market Cylinder Options....
afleetcommand

Published on Jan 28, 2017
The entire 56mm concept and now the "pre ported" Cross Performance concept are beginning to feel familiar to me. In the motorcycle world and really all the motor sports world EXCEPT chainsaw there have been companies that make their mark by offering performance enhancing products....since chainsaws or on that thin line between simply being a tool vs. a moto sport of some kind, not much attention has been given to them as a moto sport. THIS left a huge opportunity which has been largely filled by saw builders.....until now. :) THIS is just the beginning....and there will be more and more products to satisfy the demand for more and more performance per given weight of a saw...MOST interestingly enough for the casual "non" pro level type. So I suspect this is just the beginning...no I KNOW this is the first salvo....we all win. This mixed in with the parts saws create a real interesting time for the chainsaw enthusiast. Understand this is a small part if the "real" chainsaw world, but its growing, only time will tell who positions themselves best here....

 

[searcher]

Installing a crank and bearings in a chainsaw WITHOUT A PRESS
Matthew Olson

Published on Feb 1, 2017
If you are looking for aftermarket chainsaw parts, please support my channel by buying from these guys http://www.hlsproparts.com/?Click=48376

Disclaimer: ladies and gents, this is a CHAINSAW, working with, building and fiddling with these can KILL YOU, I am not and will not be responsible for improper technique or accidents even remotely relating to this video, please view for entertainment purposes only.


THIS CHANGES EVERYTHING. Putting chainsaw chassis halves together can be a pain. The heat, the bearings the sealer, the press etc etc. I don't know how anyone expects the case halves to seal properly when using heat etc, or not putting flats on bearings if you use a shop press. I know I know (Walt...you know who you are) ...supposedly using a shop press isn't a problem. But it gives me the willys.

Husqvarna ALREADY HAS THIS TOOL AVAILABLE and it is model specific. I'm very happy that I diy'd this tool instead of buying it.

Best way, I think... heat the PTO side case, drop in a bearing right out of the freezer, heat the inner race only of that bearing, drop in the cold crank right out of the freezer. heat the flywheel side case, then drop in a freezing bearing. let it all come to room temp. apply case sealer at room temp, use the tool in this vid to draw the two case halves together.

no shop press needed

what you do need... some 3/4" threaded rod, nuts, and an assortment of larger washers... 5/8 and 3/4" etc.
a shim of some kind (bushing, inner race of a larger bearing, or a piece of a scrench)
a drill and tap set, as appropriate for whatever flywheel side nut (in this case m8x1.0)
an adjustable wrench and ideally a vice. what'd I forget?

the only thing I haven't directly addressed here is the issue of bearings on the PTO side of certain saws that have integral seals. in that particular case, you would ideally have a make a similar tool that threads onto the PTO side of the crank.

 

[searcher]

Installing a crank and bearings in a chainsaw WITHOUT A PRESS part 2 m10
Matthew Olson

Published on Feb 4, 2017
If you are looking for aftermarket chainsaw parts, please support my channel by buying from these guys http://www.hlsproparts.com/?Click=48376

Disclaimer: ladies and gents, this is a CHAINSAW, working with, building and fiddling with these can KILL YOU, I am not and will not be responsible for improper technique or accidents even remotely relating to this video, please view for entertainment purposes only.

Here is a 2nd tool, for m10x1.0 threads. Ideal for husky 394 or stihl ms660 ( I think ) flywheel side crank puller.

Oh, and I hate proprietary bearings.

 

[searcher]

Husqvarna 550xp "Dead Saw Salvage", Crank Case Bearings & Seals
afleetcommand

Published on Feb 4, 2017

 

[searcher]

Putting husqvarna 350 bearings and seals together without a press
Matthew Olson

Published on Feb 4, 2017
If you are looking for aftermarket chainsaw parts, please support my channel by buying from:
http://www.hlsproparts.com/?Click=48376

Disclaimer: ladies and gents, this is a CHAINSAW, working with, building and fiddling with these can KILL YOU, I am not and will not be responsible for improper technique or accidents even remotely relating to this video, please view for entertainment purposes only.

Usually the oem bearings for these model saws come as one piece, bearing and seal, but if you want to use aftermarket stuff, the seals are available separately and you can use your own bearings... 6202's ... as long as they are open on the inside for lube. If you have sealed or closed bearings just pop out the seals and leave the bearings open towards the inside of the crankcase.

If you have a heat gun likely warming up the bearing cups could help, but you need to be careful not to damage the rubber seal with too much heat.

 

[searcher]

Husqvarna T540 XP: Unboxing/Overview/First Impressions/First Use
Human

Published on Feb 1, 2017
Husqvarna T540 XP® is designed for the high-end top handle saw segment, targeting professional customers like full pro arborists, landscapers, garden contractors and utility services who need excellent performance in combination with the best ergonomics.

https://www.treestuff.com/store/catal...

 

[searcher]

Stihl 064 Chainsaw With Ported 066 Topend
blsnelling

Published on Feb 4, 2017

 

[searcher]

Husqvarna 288XP Chainsaw Stock
blsnelling

Published on Feb 4, 2017

 

[searcher]

Farmertec / Huztl MS 036 "Kit Saw" Unboxing & Assemble Cases, Cylinder, Bar Oil Pump, and Muffler
afleetcommand

Published on Feb 12, 2017
Really some saw assembly basics using "Simple Tools", Applies to many saws actually.

 

[searcher]

Sappy Sticky Tangly Pines
Human

Published on Feb 11, 2017
Side job for a buddy, thinning out pines that were planted too close to each other 30 or so years ago. St. Louis weather for you, 30 one saturday, mid 60's the next.

Thinking this job motivated me to buy one of these. https://www.treestuff.com/store/catal...